Stronger springs

bluetard117 · Apr 14, 2019

Title.
Where can I get stronger springs for my SG? I've had this thing for a good few years now, and I'm getting to the point where the only stretch the thing gives me is when I've got the screws maxed out - to say, the springs aren't really giving much tension anymore. Is there anywhere I can get a replacement set, or a stronger set?

Simyan · Apr 14, 2019

bluetard117 said:
Title.
Where can I get stronger springs for my SG? I've had this thing for a good few years now, and I'm getting to the point where the only stretch the thing gives me is when I've got the screws maxed out - to say, the springs aren't really giving much tension anymore. Is there anywhere I can get a replacement set, or a stronger set?

Have you ordered more rods to make the stretch longer?

Simyan · Apr 14, 2019

Can be bought from sg website

DLD · Apr 14, 2019

I think SG sells heavier springs in their store.

bluetard117 · Apr 15, 2019

DLD said:
I think SG sells heavier springs in their store.

Unfortunately, they don't sell just the springs - they sell the whole arm assembly. I just want higher compression springs so I don't need to use the bars to get a good stretch going.

Stephano2879 · Apr 15, 2019

bluetard117 said:
Title.
Where can I get stronger springs for my SG? I've had this thing for a good few years now, and I'm getting to the point where the only stretch the thing gives me is when I've got the screws maxed out - to say, the springs aren't really giving much tension anymore. Is there anywhere I can get a replacement set, or a stronger set?

Penis Extender Accessories - X4 Labs™ Penis Extender

www.x4labs.com

bluetard117 · Apr 15, 2019

Could I use these on the SizeGenetics? I can't see a way to get the springs out.

Stephano2879 · Apr 15, 2019

use the small key tool that comes with the sizegenetics

bluetard117 · Apr 15, 2019

Stephano2879 said:
use the small key tool that comes with the sizegenetics

I've had this thing this entire time and did not know this at all. Thank you so much!

DLD · Apr 15, 2019

Stephano2879 said:
??

excellent help!

bluetard117 · Apr 16, 2019

Ordered some new springs yesterday! They have roughly 9~10 pounds of compression force (4200 grams), so I should be in for a treat! The default springs with the SG max at I think 2600 or 2900, so this will be fun!

bluetard117 · Apr 17, 2019

New springs came in today - the ones I ordered are unfortunately not the length of the ones that came with the SG, so I might try again to find some more at the same length, because I ended up using two springs in each chamber to load it, but damn if it doesnt offer resistance. While the springs dont compress past the second line because of their size, the tension is so high that I had to step back from using the four longer bars, to two long bars and the two medium length bars, so hey! New challenges to face, new heights (or lengths, rather) to reach!

Stephano2879 · Apr 17, 2019

bluetard117 said:
New springs came in today - the ones I ordered are unfortunately not the length of the ones that came with the SG, so I might try again to find some more at the same length, because I ended up using two springs in each chamber to load it, but damn if it doesnt offer resistance. While the springs dont compress past the second line because of their size, the tension is so high that I had to step back from using the four longer bars, to two long bars and the two medium length bars, so hey! New challenges to face, new heights (or lengths, rather) to reach!

Damn that sucks didn't know that the size would not match up with the sizegenetics these are also available the only thing is they don't list the strength but i did purchase them as i wanted to order extra bars and they are strong

Sizegenetics elongation bars?

Has anybody with the sizegenetics device fabricated their own elongation bars/extensions? If so, what did you get for hardware, and what steps did you take to assemble? I Cant see myself spending $50+ on little pieces of metal when there is likely a feasible solution that can be made by...

mattersofsize.com

bluetard117 · Apr 17, 2019

Stephano2879 said:
Damn that sucks didn't know that the size would not match up with the sizegenetics these are also available the only thing is they don't list the strength but i did purchase them as i wanted to order extra bars and they are strong

Sizegenetics elongation bars?

Has anybody with the sizegenetics device fabricated their own elongation bars/extensions? If so, what did you get for hardware, and what steps did you take to assemble? I Cant see myself spending $50+ on little pieces of metal when there is likely a feasible solution that can be made by...

mattersofsize.com

How strong compared to the original set of springs would you say they are? I don't think I'll be using the springs that I got - they're pretty much immovable. If I could get something that allows for full compression, but more tension, that'd be awesome.

bluetard117 · Apr 17, 2019

Just ordered the set of springs that Stephano posted, I'll let yall know how they are when they're in! Nice that it comes with an extra set of bars too - don't think I'll need those...yet

DLD · Apr 19, 2019

When are you be able to compare them and see what you like best. It looks like the first set is too dense to compress. Intensity sound really good though. I look forward to these new springs you’re getting in your review.

Welcome to our Male Enhancement Community!

Stronger springs

0

1

1

doublelongdaddy

0

0

0

0

0

doublelongdaddy

0

0

0

0

0

doublelongdaddy

Similar threads

Forum statistics

Newest members

Stay Connected