Can't make mityvac hidro pump work

T

trustr1

Active member
Registered
Joined
Sep 8, 2023
Messages
140
Hi
I tried to find complete guide for water pumping with mityvac. I watched what i found. But i break my head trying to understand if im doing something wrong or its just broken.
Air pump works just fine.
But when i attach the water part in the middle as shown in pictures and videos. It doesnt pump at all.
I pressed the gun over and over and over and nothing happend besides water spitting.
My penis doesnt get any vacuum effect and the pressure count return to 0 after every pump.
I fill the cilynder fully. Put my dick inside. And pump. Thats it. But nothing happend. I see water flowing to the middle tank. Eventually water starts to go out from the gun itself..i tried for an hour. Eventually i did felt some vacuum but it was so slow that it seems like i can't pump fast enough in order to get to even decent vaccum. And my hands just got tired. And with all that difficulties i suppose to maintain an erection..
Im just losing it.
Please help
 
Last edited:
You do not need to fill the entire chamber with water.You can use a minimal amount to get the vacuum you patient with yourself as you find what works best
 
DLD said:
You do not need to fill the entire chamber with water.You can use a minimal amount to get the vacuum you patient with yourself as you find what works best
Click to expand...
I will try tomorrow. Thanks
 
trustr1 said:
I will try tomorrow. Thanks
Click to expand...
Let me know how it goes.Be patient with yourself and take your time and be sure you're checking all areas to give you the expansion you desire
 
DLD said:
Let me know how it goes.Be patient with yourself and take your time and be sure you're checking all areas to give you the expansion you desire
Click to expand...
But i read here on the forum that people say not to leave air pockets. So how much water is optimal? And if not all my penis is inside water is it really count water pumping? (Minimizing air pumping risk etc)
 
DLD said:
Let me know how it goes.Be patient with yourself and take your time and be sure you're checking all areas to give you the expansion you desire
Click to expand...
Ok.
I finally managed to use it as water pump.
I ran into general post in other forum. I wish i would see such instructions first.

What you wanna do is take the cylinder first disconnected from the tube. Fill it with water. Put the penis inside. Flip the cylinder to point up. Make sure you have small air pocket at the top.
Now connect the tube to the cylinder while the tube and the pump gun are higher then the cylinder. And pump.

Yesterday i was filling the cylinder while it's connected to the tube already and all the water was flowing to the tube and up to the pump gun which was messing it up completely and it couldn't pump properly.

So now it works perfectly. However still not sure i felt significant benefit from water over air.
I didn't come out bigger than on air, and didn't felt i can go beyond 5hg (same with air).
 
trustr1 said:
Ok.
I finally managed to use it as water pump.
I ran into general post in other forum. I wish i would see such instructions first.

What you wanna do is take the cylinder first disconnected from the tube. Fill it with water. Put the penis inside. Flip the cylinder to point up. Make sure you have small air pocket at the top.
Now connect the tube to the cylinder while the tube and the pump gun are higher then the cylinder. And pump.

Yesterday i was filling the cylinder while it's connected to the tube already and all the water was flowing to the tube and up to the pump gun which was messing it up completely and it couldn't pump properly.

So now it works perfectly. However still not sure i felt significant benefit from water over air.
I didn't come out bigger than on air, and didn't felt i can go beyond 5hg (same with air).
Click to expand...
Try air and water give each a week and see what's better.
 
trustr1 said:
Ok.
I finally managed to use it as water pump.
I ran into general post in other forum. I wish i would see such instructions first.

What you wanna do is take the cylinder first disconnected from the tube. Fill it with water. Put the penis inside. Flip the cylinder to point up. Make sure you have small air pocket at the top.
Now connect the tube to the cylinder while the tube and the pump gun are higher then the cylinder. And pump.

Yesterday i was filling the cylinder while it's connected to the tube already and all the water was flowing to the tube and up to the pump gun which was messing it up completely and it couldn't pump properly.

So now it works perfectly. However still not sure i felt significant benefit from water over air.
I didn't come out bigger than on air, and didn't felt i can go beyond 5hg (same with air).
Click to expand...

I tried this but i still have the same problem you had with water pumping. I don't understand why it doesn't work. Is there a video on how to properly use it?
 
alexito95 said:
I tried this but i still have the same problem you had with water pumping. I don't understand why it doesn't work. Is there a video on how to properly use it?
Click to expand...
Many videos just go to the drop down menu and it if all there
 
alexito95 said:
I tried this but i still have the same problem you had with water pumping. I don't understand why it doesn't work. Is there a video on how to properly use it?
Click to expand...
Our brother @squirt_inducer_man is the leading authority on the usage videos. You can find his usage and mods at his album:

If you need more info, let us know. Brother @trustr1 described it very well. With the larger water reservoir mod, you can do this without the worries of flooding the pump gun. I'm using the mod now and it's fun to see how much water being collected.
 
trustr1 said:
Ok.
I finally managed to use it as water pump.
I ran into general post in other forum. I wish i would see such instructions first.

What you wanna do is take the cylinder first disconnected from the tube. Fill it with water. Put the penis inside. Flip the cylinder to point up. Make sure you have small air pocket at the top.
Now connect the tube to the cylinder while the tube and the pump gun are higher then the cylinder. And pump.
Click to expand...
This is the Bathmate's methods for out of the shower area as well. Fill, stick in, pump out to prime the pressure, walk to comfortable area and sit, pump, stare at the growing penis, smile, more pumping.

trustr1 said:
So now it works perfectly. However still not sure i felt significant benefit from water over air.
I didn't come out bigger than on air, and didn't felt i can go beyond 5hg (same with air).
Click to expand...
Make sure there is no air bubble formed anywhere as best as you can. Air bubbles/pockets allows compression, which defeats the water pumping. No compression brings out the beefiness of the penis because of the equalization of pressure all around the penis. It minimizes any fluid buildup and maximize development for the inner tissues. You won't see it, but you can feel it.
 
I'm developing a bigger water trap for MoS Shop, but it will take time. It needs to be extremely reliable and durable.
 
You must log in or register to reply here.

Similar threads

P
MityVac Hydro water trap Vacuum
Replies
11
Views
682
DLD
DLD
DLD
T
  • Sticky
Combined mityvac and bathmate
2 3
Replies
46
Views
1K
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
T
Mityvac Routine/Questions
Replies
9
Views
1K
DLD
DLD
DLD
O
Air-water hybrid pump mod with larger reservoir
Replies
9
Views
346
O
oldandlively
O
M
Need Help With Pumping
Replies
5
Views
490
DLD
DLD
DLD
Back
Top Bottom